- 1 Week Membership: $55.00
- 1 Day Membership: $10.00

- 6 Hours printing time per session. (Please note that one single run of design printing should not exceed 6 hours)

- Printing Hours is during operating hours of Learner's Hub (9am - 7pm)

- There is no restriction on the number designs for printing

1. FlashForge Adventurer 3 
- Layer Resolution up to 100-200 micron
- 150 x 150 x 150 mm build volume
- Single print head

2. FlashForge Dreamer
- Layer resolution up to 100-500 micron, 0.4mm nozzle
- 230 x 150 x 140 mm buld volume
- Dual print head

3. FlashForge Creator Pro
- Layer Resolution up tp 100 - 500 micron
- 227 x 148 x 150 mm build volume
- Dual print head

As a member of makerspace at Learner's Hub, our friendly staff will give assisstance to provide you an optimal slicing option

Flashprint Slicing Option:

Option (a):
- 20% Infill Density
- Print Speed: 60mm/s
- Travel Speed :80mm/s
- Layer Height: 0.18mm
- First Layer Height: 0.27mm
- Extruder Temperature: 205 Degree Celsius
- Platform Temperature: 50 Degree Celsius

Option (b):
- 20% Infill Density
- Print Speed: 55mm/s
- Travel Speed :80mm/s
- Layer Height: 0.20mm
- First Layer Height: 0.27mm
- Extruder Temperature: 205 Degree Celsius
- Platform Temperature: 50 Degree Celsius

Option (c):
- 20% Infill Density
- Print Speed: 50mm/s
- Travel Speed :80mm/s
- Layer Height: 0.22mm
- First Layer Height: 0.27mm
- Extruder Temperature: 205 Degree Celsius
- Platform Temperature: 50 Degree Celsius

- To all potential members, filament has to be purchased / bought from Learner's Hub.